Security checklist for Micronet SP912 Access Point router

1. Micronet SP912 Access Point Router login and password

  1. To login to Micronet SP912 Access Point Router, Open your web browser and type the default IP Address in the address bar
  2. You should now see the router login page with 2 text fields where you can type a username and a password
  3. The default username for your Micronet SP912 Access Point router is root and the default password is default
  4. In the login page of the router's web user interface, Enter the username & password, hit "Login" and now you should see the Micronet SP912 Access Point router control panel
Micronet SP912 Access Point router default login

(Remember you must be at home and connected to home WiFi to do this)

And no need to get your breathing rates high in case you have changed the username / password of Micronet SP912 Access Point and forgot them, as you can just reset the Micronet SP912 Access Point router by press-and-hold the reset button with a clip for about 15 seconds.


Micronet SP912 Access Point Quick links:

Try one of these most Common IP Addresses


Default username for Micronet SP912 Access Point: root COPY
Default password for Micronet SP912 Access Point: default COPY

Is this not your router model ? Search your router

2.Change Micronet SP912 Access Point Default Login and Password

Since, security of a network is vital, the first and foremost task is to change the Micronet SP912 Access Point router Default Login and Password to something more personal and secure

Micronet SP912 Access Point Router Password Tips:

Choose a complex and hard-to-guess password for your Micronet which only you can remember

It should be something personal, like &ilostmyvirginity@30, so that you will never forget it. Ever

Protect it

The amount of protection directly depends on the password complexity, and the effort taken to protect that password of your Micronet SP912 Access Point router

Usability first

Give Password for your Micronet SP912 Access Point router that you can remember (usability first). Of course, you can build a strong hash password with special character, numbers, greek and latin. But ultimately you will endup writing it on a sticky and putting it on the router which defeats the purpose. Here’s an example $lasttriptovegas0916

3.Change Micronet SP912 Access Point Default WiFi name (SSID) and WiFi Password and enable Network Encryption

Another small suggestion (as it has no impact on security), is to change the Micronet SP912 Access Point Default WiFi name (SSID) as it will make it more obvious for others to know which network they are connecting to.

Look for Network Name (SSID), this is the WiFi name of your Micronet SP912 Access Point Router. Don’t use your name, home address or other personal information (since this isn’t a Facebook status!) in the SSID name. (No Mr.Paul&Princy) Few funny WiFi name suggestions: I’m cheating on my WiFi!, FBI Surveillance Van #594 (scares away stupid criminals), Lord of the Pings...

Once you enter the name for your network, you have to enable WPA2-PSK encryption on your Micronet SP912 Access Point router. That’s the strongest encryption standard available for home networks.

Enter a new WPA Pre-Shared Key / WiFi Password – this is the password that you will use to connect to your home WiFi. Keep it 16-20 characters and (please!) don’t use the same password that you used for Micronet SP912 Access Point router login!

You did good so far, Now consider ⭐ Bookmarking this page, It always helps

4.Update router firmware in Micronet SP912 Access Point and turn on Automatic Updates

Router software often contains critical bugs and security vulnerabilities; so its important that you turn on Automatic Firmware updates and always keep your Micronet SP912 Access Point router up-to-date. To turn on Automatic updates, Login to your Micronet SP912 Access Point router and look for the section which contains Automatic updates and turn it "ON"

And even if the router has auto-update, check every now and then to make sure it is actually working, and the router firmware is up-to-date

5.Security is a continuous process

Just keep in mind to change the passwords often or at least once in every 6 months! on your Micronet SP912 Access Point You do not want the safety you have worked so hard for to fail just because of ignorance, negligence or casual laziness! Time for a bulletin on the fridge, folks! We can remind you though? Enter your email on below! Nope, we’re not spammers!


submit

Micronet SP912 Access Point Router Reset instructions:

How to Reset the Micronet SP912 Access Point Router To Factory Default

To reset Micronet SP912 Access Point router,

  1. Turn on the Micronet SP912 Access Point router
  2. Look for the reset button, Few routers have a tiny hole and few others have a reset button
  3. Press the Factory reset button with a straightened paperclip pin or something that gets through the tiny hole, and hold it for about 15 seconds! (till you see all lights flashing)
  4. The Micronet SP912 Access Point router will reboot automatically. the unit has been reset and is ready to use. You can start from Step 1 in this guide to set it up


Micronet SP912 Access Point Password Doesn't Work

Passwords find a way to not work! Or, in most cases, users find a way to forget them! In either case, look up the How to Reset the Micronet SP912 Access Point Router To Default Settings section

Forgot Password to Micronet SP912 Access Point Router

Incase if you have changed the default username and password of Micronet SP912 Access Point and forgot it, Please see How to Reset the Micronet SP912 Access Point Router To Default Settings section

How to boost Micronet SP912 Access Point WiFi and overcome connectivity issues:


1.Place the Micronet SP912 Access Point in a perfect spot

The perfect spot does it all; be it romance or your router! To avail the best signal and network connectivity, make sure you keep your Micronet SP912 Access Point router visibly and not facing the wall or behind the curtains

2.Find a Good Wireless Channel Instead of Auto on your Micronet SP912 Access Point router

Auto channels might fail you once in a while; believe that you’re smarter than the Micronet router! Find a seamless wireless channel instead of what the router finds automatically. This would ensure that your signal does not interfere with that of your neighbors.

If you’re running a Windows-based PC, you can see what channels neighboring Wi-Fi networks are using

  • Press Start > type “cmd”. Open Command prompt
  • In command prompt type netsh wlan show all

You will see a list of all wireless networks and the channels being used in your vicinity. instead of using “Auto” for the control channel, Pick the channel that has the lowest interference

3.Check the frequency of Micronet SP912 Access Point

Check If Micronet SP912 Access Point has dual-band, the more commonly used band would be 2.4GHz; however, switching to 5GHz would bring out better results! It depends on your device though; if you’re running an old lad, you might have to switch back to the conventional

4.Hardwire gaming consoles / media streamers into your Micronet SP912 Access Point instead of WiFi

Gaming consoles/media streamers work better when connected through Ethernet cable of Micronet SP912 Access Point; in fact, as you might not be moving your TV all over the house, why connect it to the Wi-Fi at all? The gaming consoles / video streaming devices flood the network with data. This means that if possible, you should consider hardwire (using Ethernet cable) the devices that tend to consume a lot of bandwidth. Although this can sort of defeat the purpose of having wireless network, but it can actually help your overall network speed of Micronet SP912 Access Point if you can hardwire the bandwidth hogs

5. Reboot Micronet SP912 Access Point on a schedule

Here is something important to note! On schedule, folks, reboot your Micronet SP912 Access Point router! Though routers are built to constantly be running at all times, simple tweak like regular power cycling (a fancy way of saying unplugging the power cord and shoving it back up) helps with most issues. Rebooting your Micronet SP912 Access Point can fix Internet connection problems, improve slow moving connections and resolve wireless issues altogether. Try unplugging your Micronet modem on a quarterly basis to stay proactive (Never reset, always reboot modem)