Netgear WNR2020 N300 router setup & security

1. Netgear WNR2020 N300 Router login and password

To login to your Netgear WNR2020 N300 Router, Open the web browser and type-in the default IP Address www.routerlogin.net in the address bar
You should now see the router login page with 2 text fields where you can type a username and a password
The default username for your Netgear WNR2020 N300 router is admin and the default password is password
Hit "Login" and you should see the Netgear WNR2020 N300 router control panel

Netgear WNR2020 N300 router default login

(Remember, you must be at home and connected to home WiFi to do this)

And no need to get your breathing rates high in case you have changed the username / password of Netgear WNR2020 N300 and forgot them, as you can just reset the Netgear WNR2020 N300 router by press-and-hold the reset button with a clip for about 15 seconds.

Netgear WNR2020 N300 Quick links:

http://www.routerlogin.net	Open link
http://192.168.0.1	Open link

Default username for Netgear WNR2020 N300:	admin	COPY
Default password for Netgear WNR2020 N300:	password	COPY

Is this not your router model ? Search your router

Since security of a network is vital, the first and foremost task is to change the Netgear WNR2020 N300 router Default Login and Password to something more personal and secure.

Here are the steps:

Look for ADVANCED (found in the menu bar at the top of the page) , and click on it
Look for Administration (found in the left hand side menu bar) , and click on it
Look for Set Password (found in the left hand side menu bar), and click on it

Netgear WNR2020 N300 Router Password Tips:

Choose a complex and hard-to-guess password for your Netgear which only you can remember

It should be something personal, like &ilostmyvirginity@30, so that you'll never forget it. Ever

Protect it

The amount of protection directly depends on the password complexity, and the effort taken to protect that password on your Netgear WNR2020 N300 router.

Usability first

Give Password for your Netgear WNR2020 N300 router that you can remember (usability first). Of course, you can build a strong hash password with special characters, numbers, Greek, and Latin. But ultimately you'll end up writing it on a sticky and putting it on the router, which defeats the purpose. Here is an example $lasttriptovegas0916

You did good so far. Now consider ⭐ Bookmarking this page. It always helps.

3.Change Netgear WNR2020 N300 Default WiFi name (SSID) and WiFi Password and enable Network Encryption

Another small suggestion (as it has no impact on security), is to change the Netgear WNR2020 N300 Default WiFi name (SSID) as it will make it more obvious for others to know which network they are connecting to.

Steps:

Look for - Basic (found in the menu bar at the top of the page) , and click on it
Look for - Wireless (found in the left hand side menu bar), and click on it

Look for Network Name (SSID), this is the WiFi name of your Netgear WNR2020 N300 Router. Do not use your name, home address, or other personal information (since this isn’t a Facebook status!) in the SSID name. (No Mr.Paul&Princy) A few funny WiFi name suggestions: I’m cheating on my WiFi!, FBI Surveillance Van #594 (scares away stupid criminals), Lord of the Pings ...

Once you enter the name for your network, you have to enable WPA2-PSK encryption on your Netgear WNR2020 N300 router. That’s the strongest encryption standard available for home networks.

Enter a new WPA Pre-Shared Key / WiFi Password – this is the password that you will use to connect to your home WiFi. Keep it to 16-20 characters (please!) don’t use the same password that you used for Netgear WNR2020 N300 router login!

🤓 Geek out your guests. Print a Free WiFi QR Code Sticker for your fridge now

4.Update router firmware in Netgear WNR2020 N300 and turn on Automatic Updates

Router software often contains critical bugs and security vulnerabilities; Check if your router has known vulnerabilities

Check - Netgear WNR2020 N300

Its important that you turn on Automatic Firmware updates and always keep your Netgear WNR2020 N300 router up-to-date. To turn on Automatic updates, Login to your Netgear WNR2020 N300 router and look for the section which contains Automatic updates and turn it "ON"

And even if the router has auto-update, check every now and then to make sure it is actually working, and the router firmware is up-to-date. If your router manufacturer hasn't released any updates to the firmware in the past 3-5 years, consider upgrading to a "newer" router

5.Security is a continuous process

Just keep in mind to change the passwords often or at least once in every 6 months! on your Netgear WNR2020 N300 You don't want the safety you have worked so hard for to fail just because of ignorance, negligence, or casual laziness! Time for a bulletin on the fridge, folks! We can remind you though? Enter your email below! Nope, we are not spammers!

Netgear WNR2020 N300 Router Reset instructions

How to Reset the Netgear WNR2020 N300 Router To Factory Default

To reset Netgear WNR2020 N300 router,

Turn on the Netgear WNR2020 N300 router
Look for the reset button. Few routers have a tiny hole and few others have a reset button.
Press the Factory reset button with a straightened paperclip pin or something that gets through the tiny hole, and hold it for about 15 seconds! (till you see all the lights flashing)
The Netgear WNR2020 N300 router will reboot automatically. the unit has been reset and is ready to use. You can start from Step 1 in this guide to set it up.

Netgear WNR2020 N300 Password Does not Work

Passwords find a way to not work! Or, in most cases, users find a way to forget them! In either case, look up the How to Reset the Netgear WNR2020 N300 Router To Default Settings section

Forgot Password for Netgear WNR2020 N300 Router

Incase if you have changed the default username and password of Netgear WNR2020 N300 and forgot it, please see How to Reset the Netgear WNR2020 N300 Router To Default Settings section

How to boost Netgear WNR2020 N300 WiFi and fix connectivity issues

1.Place the Netgear WNR2020 N300 in a perfect spot

The perfect spot does it all; be it romance or your router! To avail the best signal and network connectivity, make sure you keep your Netgear WNR2020 N300 router visible and not facing the wall or behind the curtains

2.Find a Good Wireless Channel Instead of Auto on your Netgear WNR2020 N300 router

Auto-channels might fail you once in a while; believe that you’re smarter than the Netgear router! Find a seamless wireless channel instead of what the router finds automatically. This would ensure that your signal doesn't interfere with that of your neighbors.

If you’re running a Windows-based PC, you can see what channels neighboring Wi-Fi networks are using.

Press Start > type “cmd”. Open Command prompt
In command prompt type netsh wlan show all

You will see a list of all wireless networks and the channels being used in your vicinity. instead of using “Auto” for the control channel, Pick the channel that has the lowest interference

3.Check the frequency of Netgear WNR2020 N300

Check if Netgear WNR2020 N300 has dual-band, the most commonly used band would be 2.4GHz; however, switching to 5GHz would bring out better results! It depends on your device though; if you’re running an old lad, you might have to switch back to the conventional

4.Hardwire gaming consoles / media streamers into your Netgear WNR2020 N300 instead of WiFi

Gaming consoles/media streamers work better when connected through Ethernet cable of Netgear WNR2020 N300; in fact, as you might not be moving your TV all over the house, why connect it to the Wi-Fi at all? The Gaming consoles / video streaming devices flood the network with data. This means that if possible, you should consider hardwire (using Ethernet cable) the devices that tend to consume a lot of bandwidth. Although this can sort of defeat the purpose of having wireless networks, it can actually help your overall network speed of Netgear WNR2020 N300 if you can hardwire the bandwidth hogs.

5. Reboot Netgear WNR2020 N300 on schedule

Here's something important to note! On schedule, folks, reboot your Netgear WNR2020 N300 router! Though routers are built to constantly be running at all times, simple tweaks like regular power cycling (a fancy way of saying, unplugging the power cord and shoving it back up) helps with most issues. Rebooting your Netgear WNR2020 N300 can fix Internet connection problems, improve slow moving connections, and resolve wireless issues altogether. Try unplugging your Netgear modem on a quarterly basis to stay proactive (Never reset; always reboot router)