Security checklist for DrayTek Vigor-2920 router

1. DrayTek Vigor-2920 Router login and password

  1. To login to DrayTek Vigor-2920 Router, Open your web browser and type the default IP Address in the address bar
  2. You should now see the router login page with 2 text fields where you can type a username and a password
  3. The default username for your DrayTek Vigor-2920 router is admin and the default password is admin
  4. In the login page of the router's web user interface, Enter the username & password, hit "Login" and now you should see the DrayTek Vigor-2920 router control panel
DrayTek Vigor-2920 router default login

(Remember you must be at home and connected to home WiFi to do this)

And no need to get your breathing rates high in case you have changed the username / password of DrayTek Vigor-2920 and forgot them, as you can just reset the DrayTek Vigor-2920 router by press-and-hold the reset button with a clip for about 15 seconds.

DrayTek Vigor-2920 Quick links: Open link

Default username for DrayTek Vigor-2920: admin COPY
Default password for DrayTek Vigor-2920: admin COPY

Is this not your router model ? Search your router

2.Change DrayTek Vigor-2920 Default Login and Password

Since, security of a network is vital, the first and foremost task is to change the DrayTek Vigor-2920 router Default Login and Password to something more personal and secure

DrayTek Vigor-2920 Router Password Tips:

Choose a complex and hard-to-guess password for your DrayTek which only you can remember

It should be something personal, like &ilostmyvirginity@30, so that you will never forget it. Ever

Protect it

The amount of protection directly depends on the password complexity, and the effort taken to protect that password of your DrayTek Vigor-2920 router

Usability first

Give Password for your DrayTek Vigor-2920 router that you can remember (usability first). Of course, you can build a strong hash password with special character, numbers, greek and latin. But ultimately you will endup writing it on a sticky and putting it on the router which defeats the purpose. Here’s an example $lasttriptovegas0916

3.Change DrayTek Vigor-2920 Default WiFi name (SSID) and WiFi Password and enable Network Encryption

Another small suggestion (as it has no impact on security), is to change the DrayTek Vigor-2920 Default WiFi name (SSID) as it will make it more obvious for others to know which network they are connecting to.


  1. Look for - Wireless LAN (found in the left hand side menu bar) , and click on it
  2. Look for - General Setup (found in the left hand side menu bar), and click on it

Look for Network Name (SSID), this is the WiFi name of your DrayTek Vigor-2920 Router. Don’t use your name, home address or other personal information (since this isn’t a Facebook status!) in the SSID name. (No Mr.Paul&Princy) Few funny WiFi name suggestions: I’m cheating on my WiFi!, FBI Surveillance Van #594 (scares away stupid criminals), Lord of the Pings...

Once you enter the name for your network, you have to enable WPA2-PSK encryption on your DrayTek Vigor-2920 router. That’s the strongest encryption standard available for home networks.

Enter a new WPA Pre-Shared Key / WiFi Password – this is the password that you will use to connect to your home WiFi. Keep it 16-20 characters and (please!) don’t use the same password that you used for DrayTek Vigor-2920 router login!

You did good so far, Now consider ⭐ Bookmarking this page, It always helps

4.Update router firmware in DrayTek Vigor-2920 and turn on Automatic Updates

Router software often contains critical bugs and security vulnerabilities; so its important that you turn on Automatic Firmware updates and always keep your DrayTek Vigor-2920 router up-to-date. To turn on Automatic updates, Login to your DrayTek Vigor-2920 router and look for the section which contains Automatic updates and turn it "ON"

And even if the router has auto-update, check every now and then to make sure it is actually working, and the router firmware is up-to-date

5.Security is a continuous process

Just keep in mind to change the passwords often or at least once in every 6 months! on your DrayTek Vigor-2920 You do not want the safety you have worked so hard for to fail just because of ignorance, negligence or casual laziness! Time for a bulletin on the fridge, folks! We can remind you though? Enter your email on below! Nope, we’re not spammers!


DrayTek Vigor-2920 Router Reset instructions:

How to Reset the DrayTek Vigor-2920 Router To Factory Default

To reset DrayTek Vigor-2920 router,

  1. Turn on the DrayTek Vigor-2920 router
  2. Look for the reset button, Few routers have a tiny hole and few others have a reset button
  3. Press the Factory reset button with a straightened paperclip pin or something that gets through the tiny hole, and hold it for about 15 seconds! (till you see all lights flashing)
  4. The DrayTek Vigor-2920 router will reboot automatically. the unit has been reset and is ready to use. You can start from Step 1 in this guide to set it up

DrayTek Vigor-2920 Password Doesn't Work

Passwords find a way to not work! Or, in most cases, users find a way to forget them! In either case, look up the How to Reset the DrayTek Vigor-2920 Router To Default Settings section

Forgot Password to DrayTek Vigor-2920 Router

Incase if you have changed the default username and password of DrayTek Vigor-2920 and forgot it, Please see How to Reset the DrayTek Vigor-2920 Router To Default Settings section

How to boost DrayTek Vigor-2920 WiFi and overcome connectivity issues:

1.Place the DrayTek Vigor-2920 in a perfect spot

The perfect spot does it all; be it romance or your router! To avail the best signal and network connectivity, make sure you keep your DrayTek Vigor-2920 router visibly and not facing the wall or behind the curtains

2.Find a Good Wireless Channel Instead of Auto on your DrayTek Vigor-2920 router

Auto channels might fail you once in a while; believe that you’re smarter than the DrayTek router! Find a seamless wireless channel instead of what the router finds automatically. This would ensure that your signal does not interfere with that of your neighbors.

If you’re running a Windows-based PC, you can see what channels neighboring Wi-Fi networks are using

  • Press Start > type “cmd”. Open Command prompt
  • In command prompt type netsh wlan show all

You will see a list of all wireless networks and the channels being used in your vicinity. instead of using “Auto” for the control channel, Pick the channel that has the lowest interference

3.Check the frequency of DrayTek Vigor-2920

Check If DrayTek Vigor-2920 has dual-band, the more commonly used band would be 2.4GHz; however, switching to 5GHz would bring out better results! It depends on your device though; if you’re running an old lad, you might have to switch back to the conventional

4.Hardwire gaming consoles / media streamers into your DrayTek Vigor-2920 instead of WiFi

Gaming consoles/media streamers work better when connected through Ethernet cable of DrayTek Vigor-2920; in fact, as you might not be moving your TV all over the house, why connect it to the Wi-Fi at all? The gaming consoles / video streaming devices flood the network with data. This means that if possible, you should consider hardwire (using Ethernet cable) the devices that tend to consume a lot of bandwidth. Although this can sort of defeat the purpose of having wireless network, but it can actually help your overall network speed of DrayTek Vigor-2920 if you can hardwire the bandwidth hogs

5. Reboot DrayTek Vigor-2920 on a schedule

Here is something important to note! On schedule, folks, reboot your DrayTek Vigor-2920 router! Though routers are built to constantly be running at all times, simple tweak like regular power cycling (a fancy way of saying unplugging the power cord and shoving it back up) helps with most issues. Rebooting your DrayTek Vigor-2920 can fix Internet connection problems, improve slow moving connections and resolve wireless issues altogether. Try unplugging your DrayTek modem on a quarterly basis to stay proactive (Never reset, always reboot modem)