Security checklist for Dlink DAP-1360 router

1.Open Dlink DAP-1360 Router IP Address

Dlink DAP-1360Router Internal IP Address: link

(Remember you must be at home and connected to home wifi to do this)

2.Login to the Dlink DAP-1360 Router

The default username for your Dlink DAP-1360 router is admin. The default password is blank (You can simply copy-paste using the buttons below)

Default username for Dlink DAP-1360: admin COPY
Default password for Dlink DAP-1360: blank

In the login page of the router's web user interface, Enter the username & password, hit "Login" and now you should see the router control panel

Dlink DAP-1360 router default login

And no need to get your breathing rates high in case you have changed the username/ password of Dlink DAP-1360 and forgot them, as you can just reset the Dlink DAP-1360 router by press-and-hold the reset button with a clip for about 15 seconds.

3.Change Dlink DAP-1360 Default Login and Password

Since, security of a network is vital, the first and foremost task is to change the Dlink DAP-1360 router Default Login and Password to something more personal and secure
Here's the steps:
• Look for - Maintenance(found in the menu bar at the top of page) , and click on it
• Look for - Admin(found in the left hand side menu bar), and click on it

Dlink DAP-1360 Router Password Tips:

Choose a complex and hard-to-guess password for your Dlink which only you can remember

It should be something personal, like &ilostmyvirginity@30, so that you will never forget it. Ever

Protect it

The amount of protection directly depends on the password complexity, and the effort taken to protect that password of your Dlink DAP-1360 router

Usability first

Give Password for your Dlink DAP-1360 router that you can remember (usability first). Of course, you can build a strong hash password with special character, numbers, greek and latin. But ultimately you will endup writing it on a sticky and putting it on the router which defeats the purpose. Here’s an example $lasttriptovegas0916

4.Change Dlink DAP-1360 Default Wifi name (SSID) and Password and enable Network Encryption

Another small suggestion (as it has no impact on security), is to change the Dlink DAP-1360 Default Wifi name (SSID) as it will make it more obvious for others to know which network they are connecting to.
• Look for - SETUP(found in the menu bar at the top of page) , and click on it
• Look for - WIRELESS SETUP(found in the left hand side menu bar), and click on it

Look for Network Name (SSID), this is the wifi name of your Dlink DAP-1360 Router. Don’t use your name, home address or other personal information (since this isn’t a Facebook status!) in the SSID name. (No Mr.Paul&Princy) Few funny wifi name suggestions: I’m cheating on my WiFi!, FBI Surveillance Van #594 (scares away stupid criminals), Lord of the Pings...
Once you enter the name for your network, you have to enable WPA2-PSK encryption on your Dlink DAP-1360 router. That’s the strongest encryption standard available for home networks.

Enter a new WPA Pre-Shared Key / Wifi Password – this is the password that you will use to connect to your home wifi. Keep it 16-20 characters and (please!) don’t use the same password that you used for Dlink DAP-1360 router login!

You did good so far, Now consider ⭐ Bookmarking this page, It always helps

5.Few more settings that you can consider for your Dlink DAP-1360 router

You need or need not choose to consider this step; it is both obsolete and quite a hassle!
• You can consider MAC Address filtering for Dlink DAP-1360 router. But, you will have to essentially login to the router to add any new devices by feeding the device’s MAC address everytime you have a guest. Your date might want to check his/her emails, you know?
• There are a lot of resources in Internet asking to Disable SSID Broadcast on your Dlink DAP-1360, but it’s more painful for you to connect every time than the hacker. Just forget, We don’t even recommend it

6.Security is a continuous process

Just keep in mind to change the passwords often or at least once in every 6 months! on your Dlink DAP-1360 You do not want the safety you have worked so hard for to fail just because of ignorance, negligence or casual laziness! Time for a bulletin on the fridge, folks! We can remind you though? Enter your email on below! Nope, we’re not spammers!

Create Dlink DAP-1360 Wifi QR Code to share wifi with your guests

Create a QR Code for your Dlink DAP-1360 wifi credentials, your guests can simply point their phone camera to the QR Code to connect to your wifi Create my Wifi QR Code

Dlink DAP-1360 router login issues:

Dlink DAP-1360 Password Doesn't Work

Passwords find a way to not work! Or, in most cases, users find a way to forget them! In either case, look up the “How to Reset the Dlink DAP-1360 Router to Default Settings” section below

Forgot Password to Dlink DAP-1360 Router

Incase if you have changed the default username and password of Dlink DAP-1360 and forgot it, Please see “How to Reset the Dlink DAP-1360 Router To Default Settings” section below

How to Reset the Dlink DAP-1360 Router To Default Settings

Incase if you have changed the default username and password of Dlink DAP-1360 and forgot it, It’s more like magic, I’d say! Press the reset button with a pin or something that gets through the tiny hole, and hold it for about 15 seconds! (till you see all lights flickering) Your Dlink DAP-1360 router shall be reset in no time, and you can start from step 1 in this guide to set it back up

We are looking for Sponsors !

Modemly helps hundreds of thousands of people every month to setup a safe and secure internet environment. We are looking for sponsors for our site Read more

How to boost Dlink DAP-1360 Wifi and overcome connectivity issues:

1.Place the Dlink DAP-1360 in a perfect spot

The perfect spot does it all; be it romance or your router! To avail the best signal and network connectivity, make sure you keep your Dlink DAP-1360 router visibly and not facing the wall or behind the curtains

2.Find a Good Wireless Channel Instead of Auto on your Dlink DAP-1360 router

Auto channels might fail you once in a while; believe that you’re smarter than the Dlink router! Find a seamless wireless channel instead of what the router finds automatically. This would ensure that your signal does not interfere with that of your neighbors.
If you’re running a Windows-based PC, you can see what channels neighboring Wi-Fi networks are using.
-Press Start > type “cmd”. Open Command prompt
-In command prompt type netsh wlan show all
You will see a list of all wireless networks and the channels being used in your vicinity. instead of using “Auto” for the control channel, Pick the channel that has the lowest interference

3.Check the frequency of Dlink DAP-1360

Check If Dlink DAP-1360 has dual-band, the more commonly used band would be 2.4GHz; however, switching to 5GHz would bring out better results! It depends on your device though; if you’re running an old lad, you might have to switch back to the conventional.

4.Hardwire gaming consoles / media streamers into your Dlink DAP-1360 instead of wifi

Gaming consoles/media streamers work better when connected through Ethernet cable of Dlink DAP-1360; in fact, as you might not be moving your TV all over the house, why connect it to the Wi-Fi at all? The gaming consoles / video streaming devices flood the network with data. This means that if possible, you should consider hardwire (using Ethernet cable) the devices that tend to consume a lot of bandwidth. Although this can sort of defeat the purpose of having wireless network, but it can actually help your overall network speed of Dlink DAP-1360 if you can hardwire the bandwidth hogs.

5. Reboot Dlink DAP-1360 on a schedule

Here is something important to note! On schedule, folks, reboot your Dlink DAP-1360 router! Though routers are built to constantly be running at all times, simple tweak like regular power cycling (a fancy way of saying unplugging the power cord and shoving it back up) helps with most issues. Rebooting your Dlink DAP-1360 can fix Internet connection problems, improve slow moving connections and resolve wireless issues altogether. Try unplugging your Dlink modem on a quarterly basis to stay proactive (Never reset, always reboot modem)