Arris TG862A router setup & security

1. Arris TG862A Router login and password

To login to your Arris TG862A Router, Open the web browser and type-in the default IP Address 192.168.0.1 in the address bar
You should now see the router login page with 2 text fields where you can type a username and a password
The default username for your Arris TG862A router is admin and the default password is password
Hit "Login" and you should see the Arris TG862A router control panel

(Remember, you must be at home and connected to home WiFi to do this)

And no need to get your breathing rates high in case you have changed the username / password of Arris TG862A and forgot them, as you can just reset the Arris TG862A router by press-and-hold the reset button with a clip for about 15 seconds.

Arris TG862A Quick links:

http://192.168.0.1	Open link

Default username for Arris TG862A:	admin	COPY
Default password for Arris TG862A:	password	COPY

Is this not your router model ? Search your router

Since security of a network is vital, the first and foremost task is to change the Arris TG862A router Default Login and Password to something more personal and secure.

Arris TG862A Router Password Tips:

Choose a complex and hard-to-guess password for your Arris which only you can remember

It should be something personal, like &ilostmyvirginity@30, so that you'll never forget it. Ever

Protect it

The amount of protection directly depends on the password complexity, and the effort taken to protect that password on your Arris TG862A router.

Usability first

Give Password for your Arris TG862A router that you can remember (usability first). Of course, you can build a strong hash password with special characters, numbers, Greek, and Latin. But ultimately you'll end up writing it on a sticky and putting it on the router, which defeats the purpose. Here is an example $lasttriptovegas0916

You did good so far. Now consider ⭐ Bookmarking this page. It always helps.

3.Change Arris TG862A Default WiFi name (SSID) and WiFi Password and enable Network Encryption

Another small suggestion (as it has no impact on security), is to change the Arris TG862A Default WiFi name (SSID) as it will make it more obvious for others to know which network they are connecting to.

Steps:

Look for - Wireless (found in the menu bar at the top of the page) , and click on it
Look for - Wireless Setup (found in the menu bar at the top of the page) , and click on it
Look for - Basic (found in the left hand side menu bar), and click on it

Look for Network Name (SSID), this is the WiFi name of your Arris TG862A Router. Do not use your name, home address, or other personal information (since this isn’t a Facebook status!) in the SSID name. (No Mr.Paul&Princy) A few funny WiFi name suggestions: I’m cheating on my WiFi!, FBI Surveillance Van #594 (scares away stupid criminals), Lord of the Pings ...

Once you enter the name for your network, you have to enable WPA2-PSK encryption on your Arris TG862A router. That’s the strongest encryption standard available for home networks.

Enter a new WPA Pre-Shared Key / WiFi Password – this is the password that you will use to connect to your home WiFi. Keep it to 16-20 characters (please!) don’t use the same password that you used for Arris TG862A router login!

🤓 Geek out your guests. Print a Free WiFi QR Code Sticker for your fridge now

4.Update router firmware in Arris TG862A and turn on Automatic Updates

Router software often contains critical bugs and security vulnerabilities; Check if your router has known vulnerabilities

Check - Arris TG862A

Its important that you turn on Automatic Firmware updates and always keep your Arris TG862A router up-to-date. To turn on Automatic updates, Login to your Arris TG862A router and look for the section which contains Automatic updates and turn it "ON"

And even if the router has auto-update, check every now and then to make sure it is actually working, and the router firmware is up-to-date. If your router manufacturer hasn't released any updates to the firmware in the past 3-5 years, consider upgrading to a "newer" router

5.Security is a continuous process

Just keep in mind to change the passwords often or at least once in every 6 months! on your Arris TG862A You don't want the safety you have worked so hard for to fail just because of ignorance, negligence, or casual laziness! Time for a bulletin on the fridge, folks! We can remind you though? Enter your email below! Nope, we are not spammers!

Arris TG862A Router Reset instructions

How to Reset the Arris TG862A Router To Factory Default

To reset Arris TG862A router,

Turn on the Arris TG862A router
Look for the reset button. Few routers have a tiny hole and few others have a reset button.
Press the Factory reset button with a straightened paperclip pin or something that gets through the tiny hole, and hold it for about 15 seconds! (till you see all the lights flashing)
The Arris TG862A router will reboot automatically. the unit has been reset and is ready to use. You can start from Step 1 in this guide to set it up.

Arris TG862A Password Does not Work

Passwords find a way to not work! Or, in most cases, users find a way to forget them! In either case, look up the How to Reset the Arris TG862A Router To Default Settings section

Forgot Password for Arris TG862A Router

Incase if you have changed the default username and password of Arris TG862A and forgot it, please see How to Reset the Arris TG862A Router To Default Settings section

How to boost Arris TG862A WiFi and fix connectivity issues

1.Place the Arris TG862A in a perfect spot

The perfect spot does it all; be it romance or your router! To avail the best signal and network connectivity, make sure you keep your Arris TG862A router visible and not facing the wall or behind the curtains

2.Find a Good Wireless Channel Instead of Auto on your Arris TG862A router

Auto-channels might fail you once in a while; believe that you’re smarter than the Arris router! Find a seamless wireless channel instead of what the router finds automatically. This would ensure that your signal doesn't interfere with that of your neighbors.

If you’re running a Windows-based PC, you can see what channels neighboring Wi-Fi networks are using.

Press Start > type “cmd”. Open Command prompt
In command prompt type netsh wlan show all

You will see a list of all wireless networks and the channels being used in your vicinity. instead of using “Auto” for the control channel, Pick the channel that has the lowest interference

3.Check the frequency of Arris TG862A

Check if Arris TG862A has dual-band, the most commonly used band would be 2.4GHz; however, switching to 5GHz would bring out better results! It depends on your device though; if you’re running an old lad, you might have to switch back to the conventional

4.Hardwire gaming consoles / media streamers into your Arris TG862A instead of WiFi

Gaming consoles/media streamers work better when connected through Ethernet cable of Arris TG862A; in fact, as you might not be moving your TV all over the house, why connect it to the Wi-Fi at all? The Gaming consoles / video streaming devices flood the network with data. This means that if possible, you should consider hardwire (using Ethernet cable) the devices that tend to consume a lot of bandwidth. Although this can sort of defeat the purpose of having wireless networks, it can actually help your overall network speed of Arris TG862A if you can hardwire the bandwidth hogs.

5. Reboot Arris TG862A on schedule

Here's something important to note! On schedule, folks, reboot your Arris TG862A router! Though routers are built to constantly be running at all times, simple tweaks like regular power cycling (a fancy way of saying, unplugging the power cord and shoving it back up) helps with most issues. Rebooting your Arris TG862A can fix Internet connection problems, improve slow moving connections, and resolve wireless issues altogether. Try unplugging your Arris modem on a quarterly basis to stay proactive (Never reset; always reboot router)